Model of the Day

Spider net telarañaby Ma_king_things

Spider net telaraña by Ma_king_things is licensed under the Creative Commons – Public Domain Dedication license, Published on October 23, 2019.

Get ready for Halloween with this cool web design with attachment holes, printed in 14 minutes at 0.2mm layer height with filaprint premium white pla.

Available HERE.

Jack

Model of the Day

Spectacle Cases by gleichaberanders

Etui – Spectacle Cases by gleichaberanders is licensed under the Creative Commons – Attribution – Non-Commercial – Share Alike license, Published on October 22, 2019.

Printed with Filaprint Premium white and Red PLA from RS Components. 0.35mm layer height and 100% infill. Main body took just over 3 hours and the end pieces that require mirroring took 38 minutes.

Available HERE.

Model of the Day

Flexi Dolphin by robotic_arm

Flexi Dolphin by robotic_arm is licensed under the Creative Commons – Attribution – Share Alike license, Published on October 17, 2019.

Flexi Dolphin by robotic_arm is licensed under the Creative Commons – Attribution – Share Alike license, Published on October 17, 2019.

Printed with silver PLA .2mm layer height and 20% infill.

Available HERE.

Model of the Day

Trolley Token coin holder keyring by OblivionStar

Trolley Token coin holder keyring by OblivionStar is licensed under the Creative Commons – Attribution license. Published on October 16, 2019.

Printed with Prusament Orange PETG at .2mm layer height, 20% infill and 4 perimeters.

Available HERE.

Model of the Day

GEARSHIFT KEYCHAIN KEYRING by CASTALIA

GEARSHIFT KEYCHAIN KEYRING by CASTALIAM, Published on October 15, 2019 www.thingiverse.com/thing:3917199, Creative Commons – Attribution – Non-Commercial – No Derivatives

GEARSHIFT KEYCHAIN KEYRING by CASTALIAM, Published on October 15, 2019 www.thingiverse.com/thing:3917199, Creative Commons – Attribution – Non-Commercial – No Derivatives

  • Body printed in Silver PLA at 0.35mm layer height.
  • Pin/Stick in Fiberlogy Black PETG at 0.2mm layer height.
  • Knob in Prusament Orange PETG at 0.2mm layer height.

Available HERE.

Jack

Model of the day

Adjustable Phone Holder v2 by MajorOCD

Adjustable Phone Holder v2 by MajorOCD
Printed with 3DFilaprint premium black and white PLA on Prusa MK2.5s at .35mm layer height and 10% infill.
Parts fit together very nicely and stand is attached to the base with a hair band.

Available on Thingiverse

Adjustable Phone Holder v2 by MajorOCD, Published on September 1, 2019, www.thingiverse.com/thing:3839409Creative Commons – Attribution